Connecting to the Technion

Bring both screens to the state shown in the picture.

Press Connect and then enter the 4 or 5 digits of your permanent personal password.

Press the yellow Authenticator icon located on the Chrome toolbar.

The yellow icon shows how much time the password being displayed has left before it becomes invalid.

If the circled area is small, wait for the password to be replaced.

After entering the password, press the number appearing in the Authenticator

and copy it into to the Pulse Secure next to the permanent password (using Ctrl+V). ++ You are now connected to the computer at the Technion.

Now go back to the dedicated directory and connect to your office computer.

The computer will ask for a password – the computer’s access password!

Remember not to disconnect by turning the power off, as this will turn off the office computer!!!

Disconnect by signing out, as shown in the picture.

Then disconnect from the network in the Pulse Secure window.

Install the Team Viewer program on your home computer, for off-site control. See link

In addition, also acquire OTP as explained in the attached link – first stage only

Connecting to the Technion – Steps